vacon nxl ac drives multi-control See Vacon NXL User's Manual, Chapter 7.4.1 for more information. Code Parameter Unit ID Description V1.1 Output frequency Hz 1 Frequency to the motor V1.2 . Frequency reference . Hz . 25 . 24-hour support +358 (0)40 837 1150 • Email: vacon@vacon.com 1 1. SAFETY This manual contains clearly marked cautions and warnings which are intended for your per- The earth leakage current of the AC drives exceeds 3.5mA AC. According to stan-dard EN61800-5-1, a reinforced protective ground connection must be ensured. This manual contains clearly marked cautions and warnings which are intended for your per- sonal safety and to avoid any unintentional damage to the product or connected appliances. Please read the information included in cautions and warnings carefully. VACON®100 X is a drive conceived for controlling asynchronous AC motors and permanent The uniquely designed VACON® X5 HazLo® AC Drive is a compact, cost effective, patented design drive built specifically for challenging applications; and is certified for Class 1, Division 2 hazardous locations. Typical Application Areas Refineries, Spray finishing, Water and Waste Water, Graineries, Gypsum Processing, Textile facilities vacon 100 industrial vacon 100 flow ac drives This manual describes the Vacon 100 IP00 Drive Module. The drive has a power range of 75-800 kW, and a voltage range of 208-240 V, 380-500 V, or 525-690 V. The drive is available in 4 different enclosure sizes: MR8, MR9, MR10 and MR12. The enclosure class of the drive is The VACON® 100 INDUSTRIAL is a workhorse for a wide range of industrial applications. The easy-to-use and robust motor controls improve the reliability and efficiency of all AC motor types, including induction, permanent magnet, and synchronous reluctance motors. Read more about VACON® 100 INDUSTRIAL VACON ® AC drives can be connected to the PROFIBUS DP network using a fieldbus board. The drive The drive can then be controlled, monitored and programmed from the Host system. VACON NX ALL IN ONE APPLICATION MANUAL; NXP NXS USER MANUAL (WALL MOUNTED & STANDALONE) VACON NXS drives, 380 ÷ 500V, EMC Class H. Part number: Description: Power, {kW} VACON NXS drive, 525 ÷ 690V, IP54: 200: 208: FR9: VACON; VACON NXS; VACON 100 ; VACON 100 HVAC; VACON® 100 FLOW-----Contact; Vacon 20 20X 20CP Modbus User Manual: 656.9 KB: PDF: Installation guide - AN: Vacon 20 CP Installation Manual: 4.8 MB: PDF: Application guide - AB Certificate - BG: VACON 20 X 20 CP STO TÜV certificate: 584.6 KB: PDF: Brochure - AD: VACON Compact Ac Drives Selection Guide: 927.1 KB: PDF: User Guide: Vacon OPTBK Option Board Manual 380-480 VAC 3-Ph 575 VAC 3-Ph Frame Size and Weights Downloads For product related downloads including brochures & manuals visit the support resources section by clicking on the link below. Contact Support For technical support email support@saidrives.com or call 281.516.3130. Prev Next 9000X AF Drives 9000X AF Drives MN04001004E—May 2011 eaton.com i Disclaimer of Warranties and Limitation of Liability The information, recommendations, descriptions, and safety notations in this document are 1 • vacon safety Tel. +358 (0)201 2121 • Fax +358 (0)201 212205 1 This quick guide includes the essential steps for easy installation and setup of your Vacon 10 frequency converter. Before commissioning your drive, download and read the complete Vacon 10 User Manual available at: vacon.com -> Support & Downloads 1. SAFETY 1 • vacon safety Tel. +358 (0)201 2121 • Fax