eveready remote control sockets instructionsstatus remote control rct-08 replacement
status remote control only
uni-com remote control sockets reset
status remote control sockets reset
status remote control not working
status remote control sockets asda
status remote control socket not working

instructions for future reference. FEATURES. This pack contains 2 wireless controlled plug sockets, which allow you to remotely switch on and off table. OPERATING INSTRUCTIONS. 2 Remote Controlled. Mains. Sockets. MODEL: A1211WH-C The LED on the Remote Control can indicate the signal transmission status. Programming Instructions. • Plug the Remote Sockets into the wall socket and switch on the mains supply, the red LED will flash every second. • If the LED . These instructions should be read carefully and left with the user of the Open the battery compartment (A) on the rear of the remote control unit by Remote control sockets. Effortlessly turn on and off household appliances at the click of a button. Each socket can be Directions for use. 1. Plug the remote-controlled socket. into an earthed household socket. · 2. The LED operating status display. will now flash slowly for approx. 30 seconds after 20 Metre clear range. Other Information. Complies to BS1363 EN61058 BS5733. Preparation and Usage. Instructions Enclosed. Insert batteries taking Programming Instructions. • Plug the Remote Sockets(s) into the wall socket(s) and switch on the mains supply, the red LED will flash every second. Status Remote Control Socket - White (Pack of 2). by Status Programmed using one handset the second also controlled the sockets without programming it. Radio controlled Socket with controller for use with domestic appliances The remote control does not require direct line-of-sight to operate.Ivation Wireless Remote Controlled AC Plug Outlets. Instructions Manual Your socket is now programmed to that number on your handheld remote.