retrax powertrax pro mx problems
retrax bed cover troubleshooting
retrax pro xr install ram 1500retrax installation instructions
retrax pro xr
retrax bed cover binding

Slide the rail over the cover until the two threaded holes in the rail are lined up behind the two holes in the spiral. Attach using two of the 10/32 by 7/16" Slide on front cover and attach here on both sides with the (2) 10-24 x 3/4” screws. Use the 1/8” Allen wrench. Remove shipping brackets and white shipping Steps 1-4 (cover assembly) Please read all instructions before assembling the bed cover. DO NOT LUBRICATE OR USE LOCTITE ON TRUCKMAN RETRAX !Thank you for your purchase of the RETRAX™ bed cover system. Please read and follow instructions before un-boxing and assembling the bed cover. IMPORTANT: Follow these instructions BEFORE installing the Retrax cover. Note: Use caution when cutting the wire ties holding the wire harness together so