Hold down button on the remote controller for 2 seconds to enter the pairing mode. Press button again and assign a number to each remote The unit starts operation by itself when the main power is turned on, but hasn’t received sign from the remote controller: • These When heating operation is selected, operation does not start right away: • When operation is started during defrosting of outdoor The operation stops for about 10 minutes in the heating operation: • Outdoor unit is in defrost. Since this is completed in max. 10 Mist is discharged from the air outlet of the indoor unit: • The cool air from the unit rapidly cools moisture in the air inside the room, fileslib. What do the symbols on an AC remote mean? Most units will have a snow flake or ice symbol for the COOL mode . This mode is used to cool the room and would typically be used during summer. The sun symbol represents HEAT mode. This is the opposite of the cool mode and is used to heat the room, usually during the cooler winter months. Since rotating parts and parts which could cause an electric shock are used in this AC outlet. Install the remote controller installation case in a.
Restrictions for the sub remote controller . Heating. Cooling. Room temp. 21°C. Upper limit temp. Management System by Mitsubishi Electric.
Indirect/Direct: Press to activate INDIRECT/. DIRECT mode. This mode is only available when the i-see control mode is effective. To avoid over-cooling.